Dremel 4000-2/30 120-Volt Variable Speed Rotary Tool Kit

!9# Dremel 4000-2/30 120-Volt Variable Speed Rotary Tool Kit

Brand : Dremel | Rate : | Price : $71.99
Post Date : Nov 26, 2011 14:57:08 | Usually ships in 24 hours

Dremel 4000 High-Performance Rotary Tool The 4000 variable speed rotary tool offers the highest performance and most versatility of all Dremel rotary tools. The increased strength of its motor plus electronic feedback circuitry delivers consistent performance at all speeds. Slim ergonomic body provides a 360-degree grip zone for control in any position. Separate on/off switch and variable-speed dial allows convenient speed adjustment and maintains your selected speed. Uses all Dremel accessories. (Mexico) Features: Quick collet lock for fast accessory changes Pencil grip close to bit Replaceable motor brushes for longer motor life Rotary Tool, 30 Accessories, 2 Attachments, Carrying Case (4000-2/30)

• Variable Speed from 5,000 to 35,000 RPM. Easy to understand speed dial features
• Soft grip for comfort and control
• Works with standard attachments plus "high performance" level attachments
• Variable speed also features electronic feedback for consistent power at lower and mid-range speeds
• Replaceable motor brushes

Order Bodum Santos Electric

You Can Build Your Own Circular Saw Table

!9# You Can Build Your Own Circular Saw Table

Since circular saws are the portable version of a table saw, they are not meant to be fixed to a table. However, the portability can be a disadvantage if you are trying to make precision cuts such as miters or other angles. To help you make more accurate cuts, you can build a circular saw table in your own shop.

Step 1

Gather your materials which include a 3/4" thick medium density overlay (MDO) in a 36"X16" sheet, a 36"X8 1/2" piece, a 36"X1" piece, and two 36"X1 1/2 " pieces, a pencil, ruler, jigsaw, eight strips of 1"X2" wood, nails, hammer, drill, 1/4" and 1/2" drill bits, screws, circular saw, 1/2" dowel, speed square, and 1/4" carriage bolt.

Step 2

Mark the midpoint 3/4" in from the edge on the long side of the 36"X16" MDO.

Step 3

Using the ruler, mark a radius from this midpoint on that front edge. Next, draw a straight line 10 inches from and parallel to the back edge.

Step 4

To cut out the table that you just marked, use the jigsaw to cut down the 10" line, around the radius, and down the 10" line on the other side. You now have the shape of the table.

Step 5

Flipping the table to its back, nail six strips of the 1"X2" wood to all of the straight edges as the support for the table.

Step 6

Go back to the original midpoint mark on the topside and drill a 1/2" hole in which the dowel will be placed to serve as the pivot for the arm.

Step 7

Down from the hole on this topside, attach two more 1"X2" strips 10 inches long to serve as the fence for the guide.

Step 8

Take the two pieces of MDO that are 36"X1 1/2" and cut a 45-degree angle off of each end. With the angles facing inward, screw these two pieces onto the ends of the 36"X8 1/2" piece of MDO. This makes the carriage with spacers.

Step 9

Screw the 36"X1 1/2" MDO to the edge of the 36"X4" MDO at a 90-degree angle to create a guide lip. Attach this assembly to the support blocks of the carriage with screws. To make the opposite side of the guide, screw the 36"X2" MDO to the other side of the carriage. The circular saw's blade should pass through the gap as it follows the guide lip, but you may need to adjust the gap width for your particular saw.

Step 10

Now, with the saw against the guide lip and the blade in the gap, fix an opposite lip to keep the saw straight as it passing through the carriage by screwing on a 36"X1" strip of MDO on the opposite side.

Step 11

Flip this carriage over and measure down 7 inches from the top edge. Mark the midpoint of the width at this point and drill a 1/2" hole for the dowel.

Step 12

Removing the upper part of the carriage, place the base under the table and tap the 1/2" dowel through both the table and carriage, not allowing the dowel to stick out past the carriage blocks. Then, reattach the upper part of the carriage.

Step 13

Slide the carriage arm as far right as possible. Putting the speed square between the arm and the fence at a 45-degree angle, drill a 1/4" hole through the upper assembly and tabletop to secure the arm with a carriage bolt. Do the same at the 90-degree and 45-degree left angle to make repeated angle cuts.

Your circular saw table is ready to use. Place the wood to be cut against the fence. Line up the arm to the angle that you want. Put the circular saw in the guide arm with a depth set so that you will only cut 1/8" into the table. Make your cut. You can now make accurate angle cuts time after time with your circular saw table.

You Can Build Your Own Circular Saw Table

Coupon Lifespan Rowing Machine Cheaper Washburn Acoustic

The Best Drill Press For Your Workshop

!9# The Best Drill Press For Your Workshop

A drill press can drill holes onto an exact depth. This tool works with pulleys and belts. A motor drives the pulley and belts to spin the quill and chuck. The chuck holds the bit. When the lever is pulled down, the bit will drop onto the wood.

A drill press has two main types: the bench top and the floor model. It comes with motors of ¼ to 1 horsepower with a 5 to 12 speed setting. Mortise-machine-like function is achieved when a spindle sander and pocket hole machine are attached.

Four of the best drill presses that became the best sellers of all time include the:
1. Delta 14-651 Professional Bench Top Mortising Machine (9-9)
2. Craftsman Professional 17 in. Drill Press (9)
3. Jet JBM-5 / 708580 Benchtop Mortiser (9) and
4. the Cummins Industrial Tools 5 Speed - Bench Top Drill Press (.99-.99).

Delta 14-651 Professional Bench Mortising Machine
Delta 14-651 1/2-HP Bench Mortising Machine became one of the most honored brands in woodworking tools that offers more precision at ½ horsepower motor. It has a cast iron base (16-3/4-by-13-1/2-inch) and a gas-filled head stabilizer.

Other features include:

o Multi-position hand lever
o A rack-and-pinion system that raises and lowers the head.
o Head column that swings 180 degrees
o Single phase induction motor
o Easy open access to drill chuck
o Adjustable dovetail
o Magnetic starter
o Easy bit and chisel changing
o 3/8 inches capacity chuck and key
o Weight: 77 pounds
o Diameter: 3-3/4 in. (95 mm)
o 2-year warranty

The set includes 1/4, 3/8, 5/16 and 1/2-inch chisels and bit sets; along with a tool and chisel tray, a gas-filled head stabilizer and multi position feed lever.

Craftsman Professional 22901 Drill Press
The Craftsman Professional 22901 is a 17-inch drill press that includes a single-arm quill handle. This enables easy presetting and repetitive drilling operation. It has a state-of-the-art column mounted on laser attachment that delivers pinpoint accuracy.

Other features include:

o Drill bit replacement.
o Battery powered
o 4-7/8 inches of quill stroke capacity power
o 16 spindle
o 3/4 hp 115/230-volt motor
o large cast iron table for expandable work support
o column-mounted laser
o adjustable work lamp
o Push button industrial style switch
o Tool tray and extension table

Jet 708580 JBM-5 1/2 Horsepower Bench Mortiser

The Jet 708580 is an affordable benchtop mortiser which was designed to take up to ½ in. chisel bits. It runs with a ½ horsepower induction motor. This tool weighs 44 pounds, is easily maneuvered and reverses on its base, allowing a long stock mortising. Bits are easily changeable by flipping the steel to open the door on each side. The Jet 708580 allows a carpenter to create good looking tennon joints.

Product Details:

o Made with cast-iron and steel
o 4 3/4-inch head stroke, 1/2-inch chisel capacity
o Quick-setting depth stop
o Four predrilled mounting holes
o Removable safety toggle switch
o Long and multi-position splines
o Includes a mortiser, three bits, chuck key
o 2-year limited warranty

Cummins Industrial Tools 5 Speed - Bench Top Drill Press
The Cummins 5 Speed is important to have in every workshop. It has 5 quick-change speed settings. The tool has a long quill for mortising. Its drilling depth is adjustable, stopping the quill positively. Cummins bench top drill presses have an adjustable table that tilts left and right, for an angled drilling operation.

Technical Details:

o ½ in. drill chuck
o Press height: 22 ½ inches
o Quill travel - 50 millimeter
o Sturdy 11 in. x 7 in. base
o 1/2 Horsepower
o Power: 60 Hz ,120 V, 2.4 amperes
o Table size 6 3/8 in. x 6 3/8 in.
o No load speed 760-3070 rpm
o 3 prong plug
o UL listed

Other known brands of drill presses include the following:

o Wilton
o Fisch Precision Tools
o Tradesman
o Dremel
o Milwaukee
o Grizzly, etc

Featured above the top-selling modern drilling tools. Consider the versatiliy of the tool you are looking to buy.

The Best Drill Press For Your Workshop

Smith And Wesson Dealers Sale